软件开发培训班 >> 编程开发 >> Oracle


提高ORACLE数据库的查询统计速度

大型数据库系统中往往要用到查询统计，但是对于数据量大的系统，用户在进行复杂的查询统计时往往感到速度很慢，不能满足应用要求，这就要求我们在设计数据库系统时进行合理设置，提高查询统计的速度。本文结合笔者的项目开发经验，阐述具体的设置方法。

以oracle7.33数据库系统为例，我们在开发大型oracle数据库系统时结合项目的特点，本着安全、高效的原则对数据库进行了一些物理设计，从而大大提高了数据库的查询统计速度。总结为如下几点：

1）扩大数据表空间到500M，用于存放本系统的数据；

2）段盘区的初始大小为10K，增长大小为10K，增长幅度为1；

3）用户临时空间增大40M；

4）系统临时表空间和回滚段表空间增大40M，并且新建4个回滚段；

5）需要经常联结查询，而且数据量又大的库存表、名录表、收发料表放在一簇内；

6）提供定时备份，备份文件放在另外的机器上。

设置数据表空间的SQL语句如下： 

CREATE TABLESPACE WXGL_DATA1 DATAFILE 'WXGL_DATA1.ORA' SIZE 500M ONLINE;

增加系统临时表空间和回滚段表空间的SQL语句如下： 

ALTER TABLESPACE TEMPORARY_DATA ADD DATAFILE 'TMP2ORCL.ORA' SIZE 40M;
ALTER TABLESPACE ROLLBACK_DATA  ADD DATAFILE 'RBS2ORCL.ORA' SIZE 40M;

将数据空间设置在指定的数据文件的SQL语句如下： 

CREATE USER ZBGL IDENTIFIED BY ZBGL;
GRANT DBA TO ZBGL;
ALTER USER ZBGL DEFAULT TABLESPACE WXGL_DATA1 TEMPORARY TABLESPACE TEMPORARY_DATA;

设置五个回滚段的SQL语句如下： 

SELECT SEGMENT_NAME FROM DBA_ROLLBACK_SEGS WHERE INITIAL_EXTENT < 512000 AND
UPPPER(OWNER) = 'PUBLIC';
SELECT UPPER(STATUS) FROM DBA_ROLLBACK_SEGS WHERE UPPER(SEGMENT_NAME) = ''

ALTER ROLLBACK SEGMENT RB1 OFFLINE;
ALTER ROLLBACK SEGMENT RB2 OFFLINE;
ALTER ROLLBACK SEGMENT RB3 OFFLINE;
ALTER ROLLBACK SEGMENT RB4 OFFLINE;
ALTER ROLLBACK SEGMENT RB5 OFFLINE;

DROP ROLLBACK SEGMENT RB1;
DROP ROLLBACK SEGMENT RB2;
DROP ROLLBACK SEGMENT RB3;
DROP ROLLBACK SEGMENT RB4;
DROP ROLLBACK SEGMENT RB5;

CREATE PUBLIC ROLLBACK SEGMENT RB1 TABLESPACE ROLLBACK_DATA 
  STORAGE (INITIAL 512000 NEXT 512000 MAXEXTENTS 121);
CREATE PUBLIC ROLLBACK SEGMENT RB2 TABLESPACE ROLLBACK_DATA 
  STORAGE (INITIAL 512000 NEXT 512000 MAXEXTENTS 121);
CREATE PUBLIC ROLLBACK SEGMENT RB3 TABLESPACE ROLLBACK_DATA 
  STORAGE (INITIAL 512000 NEXT 512000 MAXEXTENTS 121);
CREATE PUBLIC ROLLBACK SEGMENT RB4 TABLESPACE ROLLBACK_DATA 
  STORAGE (INITIAL 512000 NEXT 512000 MAXEXTENTS 121);
CREATE PUBLIC ROLLBACK SEGMENT RB5 TABLESPACE ROLLBACK_DATA 
  STORAGE (INITIAL 512000 NEXT 512000 MAXEXTENTS 121);

ALTER ROLLBACK SEGMENT RB1 ONLINE;
ALTER ROLLBACK SEGMENT RB2 ONLINE;
ALTER ROLLBACK SEGMENT RB3 ONLINE;
ALTER ROLLBACK SEGMENT RB4 ONLINE;
ALTER ROLLBACK SEGMENT RB5 ONLINE;

COMMIT;

将数据量大的库存表等放在一簇内的SQL语句如下： 

KCB='CREATE TABLE QC_KCB( '
         +' CKNM      NUMBER(8)  ,'
         +' QCNM      NUMBER(10) ,'
         +' CKKC      NUMBER(12,2),'
         +' SNCKKC    NUMBER(12,2),'
         +' LDJ       NUMBER(12,2),'
         +' BZ        VARCHAR(100),'
         +' PRIMARY KEY(CKNM,QCNM))'
         +' TABLESPACE WXGL_DATA1 ' ;（大数据量的库存表等放在WXGL_DATA1)
QCFL = 'CREATE TABLE QC_QCFL '
     + '(FLBH   NUMBER(2) PRIMARY KEY,'
     + ' FLMC   VARCHAR(20) '
     + ' ) '
     +' TABLESPACE WXGL_DATA2 ' ;(其他表放在WXGL_DATA2）

系统的基础数据库存表、名录表大约有数据80M；一个单位一般每年收发300次，收发料单大约有数据50M；系统冗余数据100M，系统辅助数据10M；因此，系统总共需要空间大约是240M，现在系统开辟数据空间500M，完全满足存储要求。由于系统使用了冗余数据，在查询常用数据时，避免了多表联结查询的情况，这样，虽然使用了更多的存储空间，但查询效率大幅度提高；同时，系统将需要经常联结查询的数据放在一簇，即将存放这些数据的空间在物理上相邻，这样也使查询速度大大提高。

另外在oracle7.33数据库的Database目录下有一个Initorcl.ora文件，改变其中的设置也可以提高查询统计速度。该文件的内容如下： 

#
# $Header: init.ora 1.2 94/10/18 16:12:36 gdudey Osd $ init.ora Copyr (c) 1991 Oracle
#
##############################################################################
# Example INIT.ORA file
#
# This file is provided by Oracle Corporation to help you customize
# your RDBMS installation for your site.  Important system parameters
# are discussed, and example settings given.
#
# Some parameter settings are generic to any size installation.
# For parameters that require different values in different size
# installations, three scenarios have been provided: SMALL, MEDIUM
# and LARGE.  Any parameter that needs to be tuned according to 
# installation size will have three settings, each one commented
# according to installation size.
#
# Use the following table to approximate the SGA size needed for the
# three scenarious provided in this file:
#
#                     -------Installation/Database Size------
#                      SMALL           MEDIUM           LARGE
#  Block         2K    4500K            6800K           17000K
#  Size          4K    5500K            8800K           21000K
#
# To set up a database that multiple instances will be using, place
# all instance-specific parameters in one file, and then have all
# of these files point to a master file using the IFILE command.
# This way, when you change a public
# parameter, it will automatically change on all instances.  This is 
# necessary, since all instances must run with the same value for many
# parameters. For example, if you choose to use private rollback segments, 
# these must be specified in different files, but since all gc_* 
# parameters must be the same on all instances, they should be in one file.
#
# INSTRUCTIONS: Edit this file and the other INIT files it calls for
# your site, either by using the values provided here or by providing
# your own.  Then place an IFILE= line into each instance-specific
# INIT file that points at this file.
###############################################################################

db_name = oracle
db_files = 20
control_files = C:\ORAWIN95\DATABASE\ctl1orcl.ora

compatible = 7.3.0.0.0

db_file_multiblock_read_count =  8 # INITIAL
# db_file_multiblock_read_count = 8                                   # SMALL  
# db_file_multiblock_read_count = 16                                  # MEDIUM 
# db_file_multiblock_read_count = 32                                  # LARGE  

db_block_buffers =  200                           # INITIAL
# db_block_buffers = 200                                              # SMALL  
# db_block_buffers = 550                                              # MEDIUM 
# db_block_buffers = 3200                                             # LARGE  

shared_pool_size =  3500000                           # INITIAL
# shared_pool_size = 3500000                                          # SMALL
# shared_pool_size = 6000000                                          # MEDIUM
# shared_pool_size = 9000000                                          # LARGE

log_checkpoint_interval = 10000

processes =  50                                         # INITIAL
# processes = 50                                                      # SMALL  
# processes = 100                                                     # MEDIUM 
# processes = 200                                                     # LARGE  

dml_locks =  100                                         # INITIAL
# dml_locks = 100                                                     # SMALL  
# dml_locks = 200                                                     # MEDIUM 
# dml_locks = 500                                                     # LARGE

log_buffer =  8192                                       # INITIAL
# log_buffer = 8192                                                   # SMALL
# log_buffer = 32768                                                  # MEDIUM
# log_buffer = 163840                                                 # LARGE

sequence_cache_entries =  10               # INITIAL
# sequence_cache_entries = 10                                         # SMALL  
# sequence_cache_entries = 30                                         # MEDIUM 
# sequence_cache_entries = 100                                        # LARGE  

sequence_cache_hash_buckets =  10     # INITIAL
# sequence_cache_hash_buckets = 10                                    # SMALL  
# sequence_cache_hash_buckets = 23                                    # MEDIUM 
# sequence_cache_hash_buckets = 89                                    # LARGE  

# audit_trail = true            # if you want auditing
# timed_statistics = true       # if you want timed statistics
max_dump_file_size = 10240      # limit trace file size to 5 Meg each
              
# log_archive_start = true      # if you want automatic archiving
log_archive_dest=%ORACLE_HOME%\DATABASE\ARCHIVE

# define directories to store trace and alert files
background_dump_dest=%RDBMS73%\trace
user_dump_dest=%RDBMS73%\trace

db_block_size = 2048

snapshot_refresh_processes = 1

remote_login_passwordfile = shared

可以修改该文件的db_file_multiblock_read_count，db_block_buffers，shared_pool_size，processes ，log_buffer，sequence_cache_entries，sequence_cache_hash_buckets等项（文件中均有提示），根据需要和系统使用的数据库服务器的特点适当改大数值，可以提高查询统计速度。这里要注意的是，必须将 log_archive_start = true 项改为False，设置才能生效。

本文介绍的Oracle数据库设置方法均在用户实际使用中经过了严格测试，证明是有效和实用的。